Two-Wheel Linear Irrigation

Two-Wheel Linear Irrigation System – High-Efficiency Solution for Rectangular Fields

Anhui Showy Agricultural Irrigation Technology Co., Ltd. delivers enterprise-grade Two-Wheel Linear Irrigation systems engineered for precision agriculture across large-scale operations. Manufactured in our 60,000 m² facility with 34,000 m² dedicated production workshops, each unit achieves over 98% field coverage while irrigating up to 240 hectares per installation. Our systems extend to a maximum length of 800 meters with travel distances reaching 3,000 meters, eliminating the corner loss typical of pivot designs. Annual capacity stands at 1,800 sets of linear and pivot systems, backed by national water-saving certifications and compliance with ASTM A123 galvanization standards for 20-year corrosion resistance.

Why Choose Two-Wheel Linear Irrigation for Your Farm?

This automated method applies water uniformly to rectangular or narrow plots by moving in a straight line perpendicular to its structure. Producing cash crops, such as vegetables, cereals, sugarcane, or orchards, where every square meter affects your return, gives you instant benefits.

By using high-flotation tires, the dual-wheel cart design reduces soil compaction. Throughout the growing season, your fields are still reachable and productive. Automation lowers labor expenses by up to 70% while preserving regular watering schedules, in contrast to manual-move systems.

When combined with low-energy precision application nozzles, wind drift and evaporation losses are greatly reduced. In arid locations, where water scarcity directly impacts profitability, you safeguard your margins.

Core Advantages That Improve Your Operation

Maximum Field Coverage

Linear movement is particularly beneficial for rectangular fields with length-to-width ratios greater than 2:1. You turn previously unirrigated areas into profitable agriculture by removing the 20% corner waste found in center pivot installations.

Cost-Efficient Deployment

Initial investment decreases by approximately 50% compared to multiple pivot units covering the same area. Your capital expenditure allocates to other critical farm infrastructure while maintaining irrigation efficiency.

Stable Performance on Variable Terrain

The enhanced wheel assembly and rotation mechanism handle grades up to 5-8% depending on span configuration. You operate confidently across uneven topography without structural stress or alignment issues.

Fertigation Integration

Nutrient injection into the irrigation stream is made possible by high automation levels. You reduce runoff pollution and increase nutrient use efficiency by applying exact fertilizer rates that correspond to crop growth phases.

Technical Specifications

Material Quality and Construction Standards

We construct the structural frame using hot-dip galvanized steel conforming to U.S. ASTM A123 specifications. This treatment ensures your system resists corrosion for two decades, even in humid or chemically treated environments.

Drive components include precision-engineered UMC motors, sealed gearboxes, high-torque couplers, and collector rings. These parts undergo load testing for thermal stability and oil seal integrity before leaving our facility. You receive equipment ready for continuous seasonal operation without unexpected downtime.

Water distribution uniformity exceeds 90% Christiansen Uniformity Coefficient across installed nozzle packages. Your crops receive consistent moisture levels regardless of field position, improving yield consistency and quality grading.​​​​​​​

Flexible Configurations for Diverse Field Conditions

Our Two-Wheel Linear Irrigation supports up to five spans in towable or stationary setups. You customize coverage length based on field dimensions and relocate the system between parcels during off-seasons to maximize asset utilization.

Three guidance options suit different operational preferences. Furrow guidance uses physical troughs for alignment. Cable guidance follows an above-ground wire for precise tracking. Satellite guidance via BDS/GPS dual-mode provides the highest accuracy without physical infrastructure, ideal for fields with complex boundaries.

Power flexibility addresses remote locations. Generator compatibility enables operation where grid electricity is unavailable or unreliable. You maintain irrigation schedules independent of local utility constraints, protecting your crop investment during critical growth windows.

Frequently Asked Questions

Q: What materials are used in your Two-Wheel Linear irrigation system?
A: We construct our system using galvanized steel meeting U.S. ASTM A123 standards to prevent corrosion for 20 years. Drive components include high-quality UMC motors, gearboxes, couplers, and collector rings, ensuring durable performance for precision irrigation.

Q: Can your system be tailored for different field sizes?
A: Yes, our linear irrigation system supports up to five spans and offers towable and moveable options. This flexibility allows you to adjust irrigation coverage and relocate the system efficiently between small to medium rectangular fields, optimizing water use according to your needs.

Q: What installation guidance does the system offer?
A: We provide two guidance options: furrow guidance and above-ground cable guidance. Both methods ensure accurate positioning and stable back-and-forth movement, delivering consistent irrigation coverage aligned with varied field topographies and soil conditions.

Q: Do you offer solutions for operating without grid power?
A: Our system is compatible with electricity generators, enabling operation in remote locations or fields with limited power supply. This feature ensures continuous, precise irrigation control through direct-drive linear motors, supporting your farming needs off-grid.

Ready to Enhance Your Irrigation Efficiency?

Transform your rectangular fields into high-performing assets with proven Two-Wheel Linear irrigation technology.

Contact us at kevin@showyirrigation.com for customized solutions tailored to your operation.